Agricultural Mechanization

Author Index

A

Abadanan Mehdizadeh, Saman Development of Respiration Rate Measurement System for Agricultural Products (Case study: Lettuce) [Volume 6, Issue 4, 2022, Pages 57-67]
Abaszadeh, Rozbeh The Short-Term Effect of Conservation Tillage on Maize Yield and Soil Properties in Rotation with Wheat in Dasht-e Naz [Volume 4, Issue 1, 2018, Pages 35-44]
Abbasgholipour, Mahdi Evaluation of the Effect of Forward Velocity and Vertical Wheel Load on the Parameters of Soil Deformation Equation and Deformation Energy in Soil Bin [Volume 7, Issue 3, 2023, Pages 27-34]
Abdanan Mehdizadeh, Saman Study of the innovation system and research and development in the agricultural sector of Argentina [Volume 7, Issue 3, 2023, Pages 1-13]
Abdanan Mehdizadeh,, Saman Assessment of uniformity of corn seedling planting in transplanted using image processing [Volume 7, Issue 1, 2022, Pages 23-33]
Abdi, Reza Evaluation of Biogas Production from Solid State Anaerobic Digestion of Municipal Sewage Sludge [Volume 4, Issue 2, 2018, Pages 151-161]
Abdi, Reza Optimization of Thermal Pre-treatment Temperature and Time and Material Concentration to Maximize Methane Production in Anaerobic Digestion of Organic Waste [Volume 6, Issue 1, 2021, Pages 69-79]
Abdi, Reza Utilization of Life Cycle Assessment (LCA) for Municipal Solid Waste Management in Urmia Metropolis [Volume 8, Issue 3, 2023]
Abdolahpour, Shamsollah Optimization of Thermal Pre-treatment Temperature and Time and Material Concentration to Maximize Methane Production in Anaerobic Digestion of Organic Waste [Volume 6, Issue 1, 2021, Pages 69-79]
Abdollahpour, Shamsollah Study of the Effect of Kinematic Index and Reel Height on the Combine Header Losses [Volume 5, Issue 1, 2021, Pages 55-60]
Abdollahpour, Shamsollah Proposing the Mathematical Model of Combine Harvester Rear Losses in Soybean Harvesting [Volume 6, Issue 1, 2021, Pages 31-38]
Abdollahpour, Shamsollah Choosing the proper interpolation method for grain loss mapping in combine harvester [Volume 8, Issue 2, 2023, Pages 55-64]
Abdualpour, Shamsolah Design, Construction and Evaluation of Variable Rate Spraying System for Weed Controlling [Volume 4, Issue 2, 2018, Pages 1-12]
Afzalinia, Sadegh Effect of Conservation Tillage Methods on Soil Physical Properties and Cotton Yield in Wheat-Cotton Rotation [Volume 4, Issue 2, 2018, Pages 141-152]
Aghili Nategh, Nahid Assessment and Comparison of Changes in Aroma, Color and Vitamin C of Dried Orange Slices in Freeze and Hot Air Dryers [Volume 6, Issue 3, 2021, Pages 41-47]
Ahmadi, Zahra Development of Respiration Rate Measurement System for Agricultural Products (Case study: Lettuce) [Volume 6, Issue 4, 2022, Pages 57-67]
Ahmadi Gheshlagh, Parviz Determination of Optimum Performance Characteristics of Combined Infrared- Convectional Dryer in Drying of Banana Slices [Volume 6, Issue 1, 2021, Pages 11-21]
Ajabshirchi, Yahya Thermal Performance Analysis of a Photovoltaic/Thermal (PV/T) Solar Collector with Fins [Volume 4, Issue 2, 2018, Pages 27-41]
Akbari, Donia Agricultural Soil Simulation during Plate Displacement Test Using Finite Element Method and Drucker-Prager Model [Volume 6, Issue 3, 2021, Pages 13-21]
Akhoundzadeh yamchi, Abolfazl The Effect of Ultrasonic Pretreatment on Drying Kinetics, Effective Moisture Diffusivity and Color of Apricot Slices [Volume 7, Issue 4, 2023, Pages 43-52]
Akram, Asadallah Evaluation of environmental pollutants in greenhouse strawberry production by hydroponic method using damage, exergy and emergy indicators in order to achieve production sustainability [Volume 8, Issue 3, 2023, Pages 27-43]
Alemi Mosavi, Seyed Hadi Investigation of Some of Traction Parameters with Biodiesel in MF-399 Tractor [Volume 6, Issue 2, 2021, Pages 1-8]
Aliasgarian Najafabadi, Saeed Design and Development of a Hydraulic Nozzle Spray Pattern Stabilization System [Volume 7, Issue 1, 2022, Pages 13-21]
Almassi, Morteza آنالیز آماری داده های باد با استفاده از تابع توزیع ویبول به منظور تأمین بخشی از انرژی مورد نیاز عملیات کشاورزی (مطالعه موردی: شهرستان بروجرد، ایران) [Volume 6, Issue 3, 2021, Pages 67-75]
Amiri Chayjan, Reza Assessment and Comparison of Changes in Aroma, Color and Vitamin C of Dried Orange Slices in Freeze and Hot Air Dryers [Volume 6, Issue 3, 2021, Pages 41-47]
Andekaeizadeh, Korosh Selection of Appropriate Forward Speed and Tillage Depth Based on the Energy Consumption Factors of Primary Tillage Tools using TOPSIS Method [Volume 7, Issue 2, 2023, Pages 31-38]
Asadi, Ardashir Development and Evaluation of a Creep Speed System for MF 285 Tractors [Volume 4, Issue 1, 2018, Pages 27-34]
Asadollahi, Hadi Evaluation of the Effect of Forward Velocity and Vertical Wheel Load on the Parameters of Soil Deformation Equation and Deformation Energy in Soil Bin [Volume 7, Issue 3, 2023, Pages 27-34]
Asadollahzadeh, Amirhossein نظارت و کنترل فرآیند جوجه‌کشی با استفاده از سامانه اینترنت اشیاء [Volume 7, Issue 1, 2022, Pages 73-77]
Asadpor Asl, Mokhtar Regression Modeling of Combine Harvester Rear Loss as a Function of Travel Speed, Cylinder Rotation Speed and Fan Rotation Speed (Claas, Model Tucano 320) [Volume 5, Issue 1, 2021, Pages 111-118]
Asakereh, Abbas Evaluation of Conventional Tractors in Terms of Agricultural and Climatic Conditions in Saral Region in Divandarreh County [Volume 6, Issue 2, 2021, Pages 21-29]
Asakereh, Abbas Evaluation of mechanized and traditional harvesting methods of sesame in the north of Khuzestan province [Volume 8, Issue 1, 2023, Pages 33-42]
Asgary ghadim, Mojtaba Investigating and analyzing methods of selecting agricultural machines in East Azarbaijan province using SWOT matrix [Volume 8, Issue 3, 2023]
Asodar, Mohammad hossein Design, Construction and Evaluation of Air Assisted Nozzle on Boom Sprayer [Volume 4, Issue 2, 2018, Pages 13-26]
Azadbakht, Mohsen Investigation of Some Qualitative Properties of Okra under the Influence of Magnetic Field [Volume 5, Issue 1, 2021, Pages 79-71]

B

Bahrami, Houshang Technical Evaluation of the Use of Flat Panel Solar Water Heaters in Greenhouse Heating in the South of Kerman Province [Volume 6, Issue 3, 2021, Pages 49-58]
Bahrami, Manouchehr Design and Development of a Hydraulic Nozzle Spray Pattern Stabilization System [Volume 7, Issue 1, 2022, Pages 13-21]
Bahramloo, Reza Meta-analysis of the Effect of Conservation Tillage on Potato Yield [Volume 7, Issue 2, 2023, Pages 19-30]
Bakhoda, Hossein آنالیز آماری داده های باد با استفاده از تابع توزیع ویبول به منظور تأمین بخشی از انرژی مورد نیاز عملیات کشاورزی (مطالعه موردی: شهرستان بروجرد، ایران) [Volume 6, Issue 3, 2021, Pages 67-75]
Bakhtiyari, Mohammad Reza Meta-analysis of the Effect of Conservation Tillage on Potato Yield [Volume 7, Issue 2, 2023, Pages 19-30]
Beglari, Maryam Agricultural Soil Simulation during Plate Displacement Test Using Finite Element Method and Drucker-Prager Model [Volume 6, Issue 3, 2021, Pages 13-21]
Behfar, Hosein Determination of the Energy Intensity in Concentrate Feed Production for Livestock (in Niroo-Sahand Factory, Tabriz, Iran) [Volume 4, Issue 2, 2018, Pages 111-119]
Behfar, Hossein Feasibility Study of Using a System Based on Image Processing for Guidance of Tractors During Plowing Operations [Volume 6, Issue 1, 2021, Pages 1-9]
Behfar, Hossien Design, Construction and Evaluation of Variable Rate Spraying System for Weed Controlling [Volume 4, Issue 2, 2018, Pages 1-12]
Bejaei, Farid Study the effect of flatbeard baking mechanism on the quality characteristic of final product [Volume 6, Issue 3, 2021, Pages 1-12]
Benakar, Ahmad Computational Fluid Dynamics (CFD) Application for Ultrasonic Desalination System Modeling [Volume 6, Issue 4, 2022, Pages 1-10]
Beranki, Sajjad Evaluation of Sorting Machine of Horticultural Products from the View Point of Machine Performance and Mechanical Damage of Fruit [Volume 5, Issue 1, 2021, Pages 43-53]

C

Chavoshi, Parinaz Estimation of Energy Efficiency and its Effective Factors in Rainfed Wheat Production in Ahar County: Application of the Stochastic Frontier Approach [Volume 8, Issue 2, 2023, Pages 33-43]

D

Dadkarami, Ali Effect of Conservation Tillage Methods on Soil Physical Properties and Cotton Yield in Wheat-Cotton Rotation [Volume 4, Issue 2, 2018, Pages 141-152]
Dashti, Ghader Estimation of Energy Efficiency and its Effective Factors in Rainfed Wheat Production in Ahar County: Application of the Stochastic Frontier Approach [Volume 8, Issue 2, 2023, Pages 33-43]
Davodalmosavi, seyed omid Analysis and modeling of energy and the amount of greenhouse gas production in apple production using machines laerning in Nazarabad city [Volume 8, Issue 4, 2024]
Dehghan, Alyas Investigation of Combine Harvester Losses for Wheat in Qom Province [Volume 4, Issue 2, 2018, Pages 91-100]
Dehghan, Elyas Assessment of Wheat Harvesting Losses with Different Combines and Provide the Necessary Solutions in Ardabil Province [Volume 5, Issue 1, 2021, Pages 1-10]
Dehghanian, Sayed Ebrahim Effects of Conservation Tillage Systems and Different Super Absorbent Polymer Rates on Soil Physical Properties and Water Use Efficiency in Grain Corn [Volume 6, Issue 1, 2021, Pages 47-57]
Deliran, Ali Thermal Performance Analysis of a Photovoltaic/Thermal (PV/T) Solar Collector with Fins [Volume 4, Issue 2, 2018, Pages 27-41]
Dorri Esfarizi, Mohammad Javad Design, Development, and Evaluation of a Belt Metering Device for Potato Planter [Volume 7, Issue 2, 2023, Pages 39-48]
Dutapeh Sofla, Javd Vali Investigation of Forward, Cylinder Rotation and Blower Rotation Speed of Tucano 320 Harvester Wheat Grain Total Losses [Volume 4, Issue 2, 2018, Pages 153-161]

E

Ebrahimi, Syrous Optimization of Thermal Pre-treatment Temperature and Time and Material Concentration to Maximize Methane Production in Anaerobic Digestion of Organic Waste [Volume 6, Issue 1, 2021, Pages 69-79]
Ebrahimi nik, Mohammad Ali Evaluation of Biogas Production from Solid State Anaerobic Digestion of Municipal Sewage Sludge [Volume 4, Issue 2, 2018, Pages 151-161]
Eshaghbeygi, Ali Design, Development, and Evaluation of a Belt Metering Device for Potato Planter [Volume 7, Issue 2, 2023, Pages 39-48]

F

Farrokhi Teimourlou, Rahman Study of the Affecting Factors on the Performance of Precision Pneumatic Cylindrical Distributor for Sowing Thyme Seed [Volume 7, Issue 2, 2023, Pages 9-18]
Farzand Ahmadi, Vahid Evaluation of Sorting Machine of Horticultural Products from the View Point of Machine Performance and Mechanical Damage of Fruit [Volume 5, Issue 1, 2021, Pages 43-53]
Fathi, Rostam Study of the innovation system and research and development in the agricultural sector of Argentina [Volume 7, Issue 3, 2023, Pages 1-13]
Feizollahzadeh, Maziar The Effect of Ultrasonic Pretreatment on Drying Kinetics, Effective Moisture Diffusivity and Color of Apricot Slices [Volume 7, Issue 4, 2023, Pages 43-52]
Fortan, Marzeieh Life Cycle Energy Assessment of Biodiesel Production from Chicken Fat Based on Transesterification Method [Volume 4, Issue 2, 2018, Pages 57-70]

G

Gahramanian, Gholamreza Effects of the Planter on Increasing the Yield of Chickpeas Indryland Conditions [Volume 6, Issue 2, 2021, Pages 39-46]
Gazor, Hamid Reza Qualitative, technical and financial investigation of the use of different sieves on useful and useless losses of irrigated and dry wheat cultivars in some moderate climate provinces of the country [Volume 8, Issue 2, 2023, Pages 1-17]
Ghaffari, Hossein The Effects of Genotype, Moisture Content, Speeds and Loading Direction on Walnut Extraction Quality [Volume 6, Issue 2, 2021, Pages 9-19]
Ghahramanian, Kholam Reza Comparison and Evaluation of Double Sided Moldboard Plough with Conventional Moldboard Ploughs [Volume 4, Issue 1, 2018, Pages 1-13]
Ghahremanzadeh, Mohammad Analysis of the Effect of Iran's Ranking Change in the Legatum Prosperity Index on Export of Iranian Agricultural Machines and Equipment [Volume 7, Issue 1, 2022, Pages 1-12]
Ghasemi Mobtaker, Hassan Modeling of Energy Consumption and Environmental Indices of Production and Processing of Tea with Regression and Artificial Neural Network Models [Volume 4, Issue 1, 2018, Pages 15-25]
Ghasemi-Mobtaker, Hassan Analysis of the Factors Affecting Field Waste from Sugarcane Harvesting [Volume 7, Issue 4, 2023, Pages 11-15]
Ghasemi-Mobtaker, Hassan Investigating the effect of irrigation method on energy and environmental indicators of almond production in Chaharmahal and Bakhtiari province [Volume 8, Issue 3, 2023, Pages 1-10]
Ghasemi-Mobtaker, Hassan Evaluation and design of forward-reverse logistics supply chain network of Shiraz biogas power plant [Volume 8, Issue 3, 2023, Pages 11-25]
Ghasemi Nejad Raeeni, Mahmoud Study of the innovation system and research and development in the agricultural sector of Argentina [Volume 7, Issue 3, 2023, Pages 1-13]
Ghaseminjad, Mohmud Design, Construction and Evaluation of Air Assisted Nozzle on Boom Sprayer [Volume 4, Issue 2, 2018, Pages 13-26]
Ghasemzadeh, Hamid Reza Investigation of Forward, Cylinder Rotation and Blower Rotation Speed of Tucano 320 Harvester Wheat Grain Total Losses [Volume 4, Issue 2, 2018, Pages 153-161]
Ghasemzadeh, Hamid Reza Study the effect of flatbeard baking mechanism on the quality characteristic of final product [Volume 6, Issue 3, 2021, Pages 1-12]
Ghasemzadeh, Hamid Reza Evaluation of Emissions and Environmental Impacts of Dairy Farms Excrement Disposal Methods by IPCC Guidelines [Volume 6, Issue 3, 2021, Pages 33-39]
Ghassemzadeh, Hamidreza Regression Modeling of Combine Harvester Rear Loss as a Function of Travel Speed, Cylinder Rotation Speed and Fan Rotation Speed (Claas, Model Tucano 320) [Volume 5, Issue 1, 2021, Pages 111-118]
Ghassemzadeh, Hamid Reza The Effects of Genotype, Moisture Content, Speeds and Loading Direction on Walnut Extraction Quality [Volume 6, Issue 2, 2021, Pages 9-19]
Ghassemzadeh, Hamid Reza Design and Development of a Hydraulic Nozzle Spray Pattern Stabilization System [Volume 7, Issue 1, 2022, Pages 13-21]
Ghods Azar, Ahad Design, Construction and Evaluation of the control valve with capable of installing at the pump outlet of the MF 285 Tractor [Volume 6, Issue 4, 2022, Pages 47-56]
Gholami Parashkoohi, Mohammad Comparative analysis of energy utilization and environmental consequences throughout the life cycle of alfalfa and silage barley cultivation in different irrigation techniques [Volume 8, Issue 3, 2023]
Gholamshahi, ALireza Investigating and analyzing methods of selecting agricultural machines in East Azarbaijan province using SWOT matrix [Volume 8, Issue 3, 2023]

H

Hafezi, Negar The phenomenon of drought and the role of agricultural mechanization in its occurrence or prevention [Volume 7, Issue 3, 2023, Pages 15-26]
Haji Agha Alizadeh, Hosein Evaluation of Energy Indicators in the Production of Coriander, Rapeseed and Wheat in Nahavand City with Computational Intelligence Techniques [Volume 5, Issue 1, 2021, Pages 11-19]
Haji Agha Alizadeh, Hossain Investigation of Some of Traction Parameters with Biodiesel in MF-399 Tractor [Volume 6, Issue 2, 2021, Pages 1-8]
Haji Agha Alizadeh, Hossein Intellectualizing and Modeling of Protection Stacking Machine with Different Furrowers [Volume 7, Issue 3, 2023, Pages 35-44]
Haji Ahmad, Ali نظارت و کنترل فرآیند جوجه‌کشی با استفاده از سامانه اینترنت اشیاء [Volume 7, Issue 1, 2022, Pages 73-77]
Hakimi, Adel Study of the Affecting Factors on the Performance of Precision Pneumatic Cylindrical Distributor for Sowing Thyme Seed [Volume 7, Issue 2, 2023, Pages 9-18]
Hardani, Shahla Evaluation of environmental pollutants in greenhouse strawberry production by hydroponic method using damage, exergy and emergy indicators in order to achieve production sustainability [Volume 8, Issue 3, 2023, Pages 27-43]
Hassanpour, Ali Evaluation of Sugar beet Processing Line Equipped with Steam Thermo-Compressor to Increase Energy Efficiency [Volume 5, Issue 1, 2021, Pages 69-61]
Heidarbeigi, Kobra Investigating the energy consumption indicators and environmental effect of the trout ponds in Ilam province [Volume 8, Issue 1, 2023, Pages 15-22]
Heidari, Ahmad Meta-analysis of the Effect of Conservation Tillage on Potato Yield [Volume 7, Issue 2, 2023, Pages 19-30]
Heidari, Mohsein Investigation of Some Effective Parameters on Distribution Uniformity of Manure Spreader [Volume 4, Issue 2, 2018, Pages 71-80]
Heidarpour, Zahra Investigating the effect of irrigation method on energy and environmental indicators of almond production in Chaharmahal and Bakhtiari province [Volume 8, Issue 3, 2023, Pages 1-10]
Hemmat,, Abbas Design and Development of a Hydraulic Nozzle Spray Pattern Stabilization System [Volume 7, Issue 1, 2022, Pages 13-21]
Homaei, Mohammad اثر ساختارهای فراکتال درختان روی دامنه ارتعاش میوه در فرآیند برداشت مکانیکی [Volume 7, Issue 2, 2023, Pages 49-58]
Hormuzi, Mahammad Ali Design, Construction and Evaluation of Air Assisted Nozzle on Boom Sprayer [Volume 4, Issue 2, 2018, Pages 13-26]
Hosainpour, Adel The Effect of Ultrasonic Pretreatment on Drying Kinetics, Effective Moisture Diffusivity and Color of Apricot Slices [Volume 7, Issue 4, 2023, Pages 43-52]
Hosseingholilou, Behnam Computational Fluid Dynamics (CFD) Application for Ultrasonic Desalination System Modeling [Volume 6, Issue 4, 2022, Pages 1-10]
Hosseinpour, Soleiman نظارت و کنترل فرآیند جوجه‌کشی با استفاده از سامانه اینترنت اشیاء [Volume 7, Issue 1, 2022, Pages 73-77]
Hosseinpour, Soleiman Evaluation of the Environmental Burdens of Sugar Beet Production with the Life Cycle Method in Hamadan Province [Volume 8, Issue 2, 2023, Pages 45-53]
Hydari, Mohsen Development and Evaluation of a Creep Speed System for MF 285 Tractors [Volume 4, Issue 1, 2018, Pages 27-34]

J

Jaberi Moaz, Mojtaba Agricultural Soil Simulation during Plate Displacement Test Using Finite Element Method and Drucker-Prager Model [Volume 6, Issue 3, 2021, Pages 13-21]
Jaberimoeaz, Mojtaba Effect of Soil Compaction on Seed Germination of Some Seedlings to Determine Some Design Parameters of Planting Machines [Volume 5, Issue 1, 2021, Pages 103-110]
Jaberi Moeaz, Mojtaba Design, Fabrication and Evaluation of Power Transmission to Cutter Bar by Mechanical Gearbox Mechanism [Volume 6, Issue 4, 2022, Pages 21-33]
Jafari, Ali Potential of Biogas Production from Animal Waste in Rural Areas of West Eyvan County, Ilam Province [Volume 4, Issue 2, 2018, Pages 101-110]
Jafari, Ali نظارت و کنترل فرآیند جوجه‌کشی با استفاده از سامانه اینترنت اشیاء [Volume 7, Issue 1, 2022, Pages 73-77]
Jafari, Ali Analysis and modeling of energy and the amount of greenhouse gas production in apple production using machines laerning in Nazarabad city [Volume 8, Issue 4, 2024]
Jafari, Mehrnoosh Design, Development, and Evaluation of a Belt Metering Device for Potato Planter [Volume 7, Issue 2, 2023, Pages 39-48]
Jahangir Moghadam, Parisa Optimization of Biogas Production from Co-digestion of Livestock Manure and Pumpkin Waste using the Response Surface Methodology (RSM) [Volume 5, Issue 1, 2021, Pages 101-93]
Jalali, Arman Investigation of Forward, Cylinder Rotation and Blower Rotation Speed of Tucano 320 Harvester Wheat Grain Total Losses [Volume 4, Issue 2, 2018, Pages 153-161]
Jalali, Arman Study of the Effect of Kinematic Index and Reel Height on the Combine Header Losses [Volume 5, Issue 1, 2021, Pages 55-60]
Jalali, Arman Effect of Conservation Tillage Speed and Depth on Crop Residue, Soil Moisture and Soil Resistance [Volume 6, Issue 1, 2021, Pages 23-30]
Jalali, Solmaz Studding the Precooling Process of Apple in the Commercial and the New Designed Package [Volume 4, Issue 2, 2018, Pages 81-90]
Jalalvand, Mehrdad آنالیز آماری داده های باد با استفاده از تابع توزیع ویبول به منظور تأمین بخشی از انرژی مورد نیاز عملیات کشاورزی (مطالعه موردی: شهرستان بروجرد، ایران) [Volume 6, Issue 3, 2021, Pages 67-75]
Javadikia, Hossein Modeling and Evaluation of Honey Adulteration Based on Image Processing of Water-Soluble Samples [Volume 5, Issue 1, 2021, Pages 33-41]
Javadimoghaddam, Jalal Investigating the Effect of Using Shading Net on Climate Change in Pistachio and Apricot Gardens [Volume 7, Issue 1, 2022, Pages 49-72]

K

Kaab, َAli Analysis of the Factors Affecting Field Waste from Sugarcane Harvesting [Volume 7, Issue 4, 2023, Pages 11-15]
Kamali, Seid Masuod Optimization of Thermal Pre-treatment Temperature and Time and Material Concentration to Maximize Methane Production in Anaerobic Digestion of Organic Waste [Volume 6, Issue 1, 2021, Pages 69-79]
Kamandar, Mohammad Reza Behavior investigation of wild privet stem in quasi-static and impact cutting [Volume 8, Issue 2, 2023]
Karimi, Hadi Classification of Date Fruit Varieties Based on the Use of Capacitive and Force Transducer Responses [Volume 7, Issue 2, 2023, Pages 1-8]
Karimi, Yaser Modeling and Optimizing Harvested Product Quality and Energy Consumption of Cylindrical Mower in Alfalfa Harvesting [Volume 6, Issue 1, 2021, Pages 39-47]
Kazemi Karaji, Fateme Assessment of uniformity of corn seedling planting in transplanted using image processing [Volume 7, Issue 1, 2022, Pages 23-33]
Kermani, Ali mashaallah Investigating the Fracture Properties of Walnut Shell under Uniaxial Compressive Loading in the Situation of being enclosed in a Transverse Plane [Volume 8, Issue 1, 2023, Pages 43-52]
Keshavarzpour Lonbar, Fereydoun Determining the Important Energy Indicators in Cucumber Greenhouses in Varamin Region [Volume 6, Issue 2, 2021, Pages 75-84]
Khaker, Angin Comparison and Evaluation of Double Sided Moldboard Plough with Conventional Moldboard Ploughs [Volume 4, Issue 1, 2018, Pages 1-13]
Khalaghi, Mahya پیرولیز بستر ثابت گیاه ایفوربیا تیروکالی برای تولید نفت زیستی [Volume 6, Issue 2, 2021, Pages 57-65]
Khalili, Hassan Investigation of Forward, Cylinder Rotation and Blower Rotation Speed of Tucano 320 Harvester Wheat Grain Total Losses [Volume 4, Issue 2, 2018, Pages 153-161]
Khalili Kolikand, Hassan Regression Modeling of Combine Harvester Rear Loss as a Function of Travel Speed, Cylinder Rotation Speed and Fan Rotation Speed (Claas, Model Tucano 320) [Volume 5, Issue 1, 2021, Pages 111-118]
Khanali, Majid Modeling of Energy Consumption and Environmental Indices of Production and Processing of Tea with Regression and Artificial Neural Network Models [Volume 4, Issue 1, 2018, Pages 15-25]
Khanali, Majid Potential of Biogas Production from Animal Waste in Rural Areas of West Eyvan County, Ilam Province [Volume 4, Issue 2, 2018, Pages 101-110]
Khanali, Majid Investigating the effect of irrigation method on energy and environmental indicators of almond production in Chaharmahal and Bakhtiari province [Volume 8, Issue 3, 2023, Pages 1-10]
Khanali, Majid Evaluation and design of forward-reverse logistics supply chain network of Shiraz biogas power plant [Volume 8, Issue 3, 2023, Pages 11-25]
Khanali, Majid Evaluation of environmental pollutants in greenhouse strawberry production by hydroponic method using damage, exergy and emergy indicators in order to achieve production sustainability [Volume 8, Issue 3, 2023, Pages 27-43]
Khanali, Majid Evaluation of the environmental sustainability of the integrated biorefinery for the production of chicken meat and biological products [Volume 8, Issue 4, 2024]
Khedri, Simin The current situation and evaluating scenarios and solutions to improve sugarcane transportation to the sugar factory [Volume 8, Issue 1, 2023, Pages 52-60]
Kheyri, Reza Utilization of Life Cycle Assessment (LCA) for Municipal Solid Waste Management in Urmia Metropolis [Volume 8, Issue 3, 2023]
Khodaei, Jalal Modeling and Optimizing Harvested Product Quality and Energy Consumption of Cylindrical Mower in Alfalfa Harvesting [Volume 6, Issue 1, 2021, Pages 39-47]
Khodaei, Jalal The Effect of Travel Speed and the Position of Rotary Tiller Hood on Soil Surface Roughness [Volume 6, Issue 4, 2022, Pages 35-45]
Khorasani Ferdavani, Mohamad Esmail Selection of Appropriate Forward Speed and Tillage Depth Based on the Energy Consumption Factors of Primary Tillage Tools using TOPSIS Method [Volume 7, Issue 2, 2023, Pages 31-38]
Khorshidi, Mohamad Bagher Determination of Physical and Mechanical Properties of Onion (CV. Horand) [Volume 4, Issue 1, 2018, Pages 79-86]
Khoshtaghaz, Mohammad Hadi Development of Respiration Rate Measurement System for Agricultural Products (Case study: Lettuce) [Volume 6, Issue 4, 2022, Pages 57-67]
Kiapei, Ali Mass Flow Rate Measurement Based on Electrical Capacitance Tomography with Feasibility Application in Cereal Combines and Assessment of Discretization on Field Potential [Volume 8, Issue 1, 2023, Pages 23-31]
Kisalaei, Asma Prediction of Chlorophyll Content of Tomato Plant by Artificial Neural Networks and Adaptive Nero-Fuzzy Inference System [Volume 6, Issue 3, 2021, Pages 59-65]
Kiyani, Reza Evaluation of Energy Indicators in the Production of Coriander, Rapeseed and Wheat in Nahavand City with Computational Intelligence Techniques [Volume 5, Issue 1, 2021, Pages 11-19]
Kolahi, Ebrahim Proposing the Mathematical Model of Combine Harvester Rear Losses in Soybean Harvesting [Volume 6, Issue 1, 2021, Pages 31-38]

L

Lak, Arezo Design, Construction and Evaluation of Variable Rate Spraying System for Weed Controlling [Volume 4, Issue 2, 2018, Pages 1-12]
Liaghat, Abdolmajid Investigating the effect of irrigation method on energy and environmental indicators of almond production in Chaharmahal and Bakhtiari province [Volume 8, Issue 3, 2023, Pages 1-10]
Lotalian, Amin Life Cycle Energy Assessment of Biodiesel Production from Chicken Fat Based on Transesterification Method [Volume 4, Issue 2, 2018, Pages 57-70]

M

Maleki, , Mohammad Reza The Effect of Travel Speed and the Position of Rotary Tiller Hood on Soil Surface Roughness [Volume 6, Issue 4, 2022, Pages 35-45]
Mardani, Aref Evaluation of the Effect of Forward Velocity and Vertical Wheel Load on the Parameters of Soil Deformation Equation and Deformation Energy in Soil Bin [Volume 7, Issue 3, 2023, Pages 27-34]
Marzban, Afshin The current situation and evaluating scenarios and solutions to improve sugarcane transportation to the sugar factory [Volume 8, Issue 1, 2023, Pages 52-60]
Maysami, Mohammad Ali Determination of the Energy Intensity in Concentrate Feed Production for Livestock (in Niroo-Sahand Factory, Tabriz, Iran) [Volume 4, Issue 2, 2018, Pages 111-119]
Maysami, Mohammad Ali Evaluation of Biogas Production from Solid State Anaerobic Digestion of Municipal Sewage Sludge [Volume 4, Issue 2, 2018, Pages 151-161]
Maysami, Mohammad Ali Energy Consumption Pattern for Corn Production in Iran [Volume 6, Issue 1, 2021, Pages 49-55]
Mesri Gundoshmian, T Techno-Economic Analysis of the Mechanized Seed Corn Harvesting: A Case Study of Pars Agriculture and Animal Husbandry Industry (Parsabad Moghan, Iran) [Volume 7, Issue 3, 2023, Pages 45-54]
Mirzazadeh, Ali Proposing the Mathematical Model of Combine Harvester Rear Losses in Soybean Harvesting [Volume 6, Issue 1, 2021, Pages 31-38]
Mobli, Hosein Potential of Biogas Production from Animal Waste in Rural Areas of West Eyvan County, Ilam Province [Volume 4, Issue 2, 2018, Pages 101-110]
Mobli, Hossien Modeling of Energy Consumption and Environmental Indices of Production and Processing of Tea with Regression and Artificial Neural Network Models [Volume 4, Issue 1, 2018, Pages 15-25]
Mohamadi Abdevand, Elahe Investigating the Fracture Properties of Walnut Shell under Uniaxial Compressive Loading in the Situation of being enclosed in a Transverse Plane [Volume 8, Issue 1, 2023, Pages 43-52]
Mohammadi, Dadgar Effect of Conservation Tillage Methods on Soil Physical Properties and Cotton Yield in Wheat-Cotton Rotation [Volume 4, Issue 2, 2018, Pages 141-152]
Mohammadi, Farzad The Effect of Travel Speed and the Position of Rotary Tiller Hood on Soil Surface Roughness [Volume 6, Issue 4, 2022, Pages 35-45]
Mohammadi, Farzad Mass Flow Rate Measurement Based on Electrical Capacitance Tomography with Feasibility Application in Cereal Combines and Assessment of Discretization on Field Potential [Volume 8, Issue 1, 2023, Pages 23-31]
Mohammadi, Salim Energy Consumption Pattern for Corn Production in Iran [Volume 6, Issue 1, 2021, Pages 49-55]
Mohammadi Alasti, Behzad Evaluation of the Effect of Forward Velocity and Vertical Wheel Load on the Parameters of Soil Deformation Equation and Deformation Energy in Soil Bin [Volume 7, Issue 3, 2023, Pages 27-34]
Mohammadi-Alasti, Behzad اثر ساختارهای فراکتال درختان روی دامنه ارتعاش میوه در فرآیند برداشت مکانیکی [Volume 7, Issue 2, 2023, Pages 49-58]
Mohammadi Ghermezgoli, Khosro The Effects of Genotype, Moisture Content, Speeds and Loading Direction on Walnut Extraction Quality [Volume 6, Issue 2, 2021, Pages 9-19]
Mohammad Nikbakhat, Ali Evaluation of Electronic Nose System Based on Metal Oxide Semiconductor (MOS) Sensors to Detect the Purity of Peppermint Ssential Oil [Volume 6, Issue 2, 2021, Pages 31-37]
Mohammad Nikbakht, Ali Evaluation of Sugar beet Processing Line Equipped with Steam Thermo-Compressor to Increase Energy Efficiency [Volume 5, Issue 1, 2021, Pages 69-61]
Mohammad Zamani, Davood Comparative analysis of energy utilization and environmental consequences throughout the life cycle of alfalfa and silage barley cultivation in different irrigation techniques [Volume 8, Issue 3, 2023]
Mokhtari Sataiy, Moein Technical Evaluation of the Use of Flat Panel Solar Water Heaters in Greenhouse Heating in the South of Kerman Province [Volume 6, Issue 3, 2021, Pages 49-58]
Momeni, Davood Technical Evaluation of the Use of Flat Panel Solar Water Heaters in Greenhouse Heating in the South of Kerman Province [Volume 6, Issue 3, 2021, Pages 49-58]
Momeni, Davood Investigating the Effect of Using Shading Net on Climate Change in Pistachio and Apricot Gardens [Volume 7, Issue 1, 2022, Pages 49-72]
Moradi, Ahmad Thermal Performance Analysis of a Photovoltaic/Thermal (PV/T) Solar Collector with Fins [Volume 4, Issue 2, 2018, Pages 27-41]
Moradi, Hamed Potential of Biogas Production from Animal Waste in Rural Areas of West Eyvan County, Ilam Province [Volume 4, Issue 2, 2018, Pages 101-110]
Moradinejad, Norooz Design, Construction and Evaluation of the control valve with capable of installing at the pump outlet of the MF 285 Tractor [Volume 6, Issue 4, 2022, Pages 47-56]
Mosavi, Seid Mehdi The Short-Term Effect of Conservation Tillage on Maize Yield and Soil Properties in Rotation with Wheat in Dasht-e Naz [Volume 4, Issue 1, 2018, Pages 35-44]
Mostafaei, Mostafa Evaluation of the Best Kinetic Model in Thin Layer Drying of Kumquat Based on Desirability Function [Volume 4, Issue 1, 2018, Pages 57-67]
Mostafaei, Mostafa Modeling and Evaluation of Honey Adulteration Based on Image Processing of Water-Soluble Samples [Volume 5, Issue 1, 2021, Pages 33-41]
Motamed Alshariati, Hanifreza Feasibility Study of Using Cow Dung to Generate Electricity for Agricultural Sector in Mashhad County and its Impact on Decreasing Environmental Pollutions in 2035 [Volume 7, Issue 4, 2023, Pages 35-42]
Motevali, Ali Investigating the Composition of Sugarcane Bagasse and Rice Straw Biomass with Natural Binders on the Mechanical and Thermal Properties of Fuel Pellets [Volume 7, Issue 4, 2023, Pages 1-10]
Mousazadeh, Hossein Design and Performance Simulation of Magnetic Induction Tomography System for Image Reconstruction of Solid-liquid Two-phase Flow [Volume 6, Issue 3, 2021, Pages 23-31]
Mousazadeh, Hossein نظارت و کنترل فرآیند جوجه‌کشی با استفاده از سامانه اینترنت اشیاء [Volume 7, Issue 1, 2022, Pages 73-77]
Mousazadeh, Hossein Mass Flow Rate Measurement Based on Electrical Capacitance Tomography with Feasibility Application in Cereal Combines and Assessment of Discretization on Field Potential [Volume 8, Issue 1, 2023, Pages 23-31]
Musevi Niya, Mir Javad Evaluation of the Acceleration and Predominant Frequency of Truck Bed on Local Roads and Investigation of the Effective Parameters in Vibration [Volume 5, Issue 1, 2021, Pages 91-81]
Myasami, Mohammadali Evaluation of Emissions and Environmental Impacts of Dairy Farms Excrement Disposal Methods by IPCC Guidelines [Volume 6, Issue 3, 2021, Pages 33-39]

N

Nabian, Adel اثر ساختارهای فراکتال درختان روی دامنه ارتعاش میوه در فرآیند برداشت مکانیکی [Volume 7, Issue 2, 2023, Pages 49-58]
Naderloo, Leila Modeling and Evaluation of Honey Adulteration Based on Image Processing of Water-Soluble Samples [Volume 5, Issue 1, 2021, Pages 33-41]
Nalbandi, Habibeh Studding the Precooling Process of Apple in the Commercial and the New Designed Package [Volume 4, Issue 2, 2018, Pages 81-90]
Nalbandi, Habibeh Evaluation of Sorting Machine of Horticultural Products from the View Point of Machine Performance and Mechanical Damage of Fruit [Volume 5, Issue 1, 2021, Pages 43-53]
Nalbandi, Habibeh Determination of Optimum Performance Characteristics of Combined Infrared- Convectional Dryer in Drying of Banana Slices [Volume 6, Issue 1, 2021, Pages 11-21]
Nalbandi, Habibeh Study the effect of flatbeard baking mechanism on the quality characteristic of final product [Volume 6, Issue 3, 2021, Pages 1-12]
Namdari, Majid Evaluation of the Environmental Burdens of Sugar Beet Production with the Life Cycle Method in Hamadan Province [Volume 8, Issue 2, 2023, Pages 45-53]
Namjoo, Moslem Behavior investigation of wild privet stem in quasi-static and impact cutting [Volume 8, Issue 2, 2023]
Navid, Hossein Investigation of Forward, Cylinder Rotation and Blower Rotation Speed of Tucano 320 Harvester Wheat Grain Total Losses [Volume 4, Issue 2, 2018, Pages 153-161]
Navid, Hossein Evaluation of the Acceleration and Predominant Frequency of Truck Bed on Local Roads and Investigation of the Effective Parameters in Vibration [Volume 5, Issue 1, 2021, Pages 91-81]
Navid, Hossein Regression Modeling of Combine Harvester Rear Loss as a Function of Travel Speed, Cylinder Rotation Speed and Fan Rotation Speed (Claas, Model Tucano 320) [Volume 5, Issue 1, 2021, Pages 111-118]
Nazarpour, Mehrshad پیرولیز بستر ثابت گیاه ایفوربیا تیروکالی برای تولید نفت زیستی [Volume 6, Issue 2, 2021, Pages 57-65]
Nghipour, Fariba Qualitative, technical and financial investigation of the use of different sieves on useful and useless losses of irrigated and dry wheat cultivars in some moderate climate provinces of the country [Volume 8, Issue 2, 2023, Pages 1-17]
Noorani, Mohammad Hosein Evaluation of mechanized and traditional harvesting methods of sesame in the north of Khuzestan province [Volume 8, Issue 1, 2023, Pages 33-42]
Nouri, Mohammad Evaluation of Emissions and Environmental Impacts of Dairy Farms Excrement Disposal Methods by IPCC Guidelines [Volume 6, Issue 3, 2021, Pages 33-39]
Nuraeefara, Kamal Comparative analysis of energy utilization and environmental consequences throughout the life cycle of alfalfa and silage barley cultivation in different irrigation techniques [Volume 8, Issue 3, 2023]

O

Orak,, Hadi Assessment of uniformity of corn seedling planting in transplanted using image processing [Volume 7, Issue 1, 2022, Pages 23-33]

P

Pirmoradi, Meisam Modeling and Evaluation of Honey Adulteration Based on Image Processing of Water-Soluble Samples [Volume 5, Issue 1, 2021, Pages 33-41]
Pir Moradi, Meysam Evaluation of the Best Kinetic Model in Thin Layer Drying of Kumquat Based on Desirability Function [Volume 4, Issue 1, 2018, Pages 57-67]
Pourdarbani, Razieh Detection of Different Chickpea Varieties Using a Computer Vision System Based on Computational Intelligence [Volume 5, Issue 1, 2021, Pages 21-31]

R

Rafiee, Shahin Design and Performance Simulation of Magnetic Induction Tomography System for Image Reconstruction of Solid-liquid Two-phase Flow [Volume 6, Issue 3, 2021, Pages 23-31]
Rafiee, Shahin Evaluation of the Environmental Burdens of Sugar Beet Production with the Life Cycle Method in Hamadan Province [Volume 8, Issue 2, 2023, Pages 45-53]
Rahimzadeh, Reza Effects of the Planter on Increasing the Yield of Chickpeas Indryland Conditions [Volume 6, Issue 2, 2021, Pages 39-46]
Rahnoma, Majid Design, Construction and Evaluation of Air Assisted Nozzle on Boom Sprayer [Volume 4, Issue 2, 2018, Pages 13-26]
Ramezani Boukat, Ali Evaluation of the Acceleration and Predominant Frequency of Truck Bed on Local Roads and Investigation of the Effective Parameters in Vibration [Volume 5, Issue 1, 2021, Pages 91-81]
Ranjbar, Sajjad Evaluation of the Acceleration and Predominant Frequency of Truck Bed on Local Roads and Investigation of the Effective Parameters in Vibration [Volume 5, Issue 1, 2021, Pages 91-81]
Rasooli Sharabiani, Vali Prediction of Chlorophyll Content of Tomato Plant by Artificial Neural Networks and Adaptive Nero-Fuzzy Inference System [Volume 6, Issue 3, 2021, Pages 59-65]
Rezvanivand Fanaei, Adel Evaluation of Sugar beet Processing Line Equipped with Steam Thermo-Compressor to Increase Energy Efficiency [Volume 5, Issue 1, 2021, Pages 69-61]
Rohani, Abbas Evaluation of Biogas Production from Solid State Anaerobic Digestion of Municipal Sewage Sludge [Volume 4, Issue 2, 2018, Pages 151-161]
Rokhbin, Arash Investigation of Some Qualitative Properties of Okra under the Influence of Magnetic Field [Volume 5, Issue 1, 2021, Pages 79-71]
Roozbeh, Majid Effects of Conservation Tillage Systems and Different Super Absorbent Polymer Rates on Soil Physical Properties and Water Use Efficiency in Grain Corn [Volume 6, Issue 1, 2021, Pages 47-57]
Roozbeh, Majid Comparison of cotton harvesters performance affected by variety and plant density in Fars province [Volume 7, Issue 1, 2022, Pages 35-47]
Roshanghiyasi, Hossein نظارت و کنترل فرآیند جوجه‌کشی با استفاده از سامانه اینترنت اشیاء [Volume 7, Issue 1, 2022, Pages 73-77]
Roshan Moghaddam, Maziar Assessment and Comparison of Changes in Aroma, Color and Vitamin C of Dried Orange Slices in Freeze and Hot Air Dryers [Volume 6, Issue 3, 2021, Pages 41-47]
Rouhani, Abbas Optimization of Thermal Pre-treatment Temperature and Time and Material Concentration to Maximize Methane Production in Anaerobic Digestion of Organic Waste [Volume 6, Issue 1, 2021, Pages 69-79]
Rouhani, Abbas Evaluation of Electronic Nose System Based on Metal Oxide Semiconductor (MOS) Sensors to Detect the Purity of Peppermint Ssential Oil [Volume 6, Issue 2, 2021, Pages 31-37]
Roustapour, Omidreza Investigating the Effect of Using Shading Net on Climate Change in Pistachio and Apricot Gardens [Volume 7, Issue 1, 2022, Pages 49-72]

S

Sabzi, Sajad Detection of Different Chickpea Varieties Using a Computer Vision System Based on Computational Intelligence [Volume 5, Issue 1, 2021, Pages 21-31]
Sadeghi, Hossein Investigating the Composition of Sugarcane Bagasse and Rice Straw Biomass with Natural Binders on the Mechanical and Thermal Properties of Fuel Pellets [Volume 7, Issue 4, 2023, Pages 1-10]
Saeidi Rad, Mohammad Hossein Investigation of Different Tillage Methods on some Machine and Soil Parameters in Temperate Climate Regions [Volume 7, Issue 4, 2023, Pages 53-64]
Safari, Mahmoud Investigation of Combine Harvester Losses for Wheat in Qom Province [Volume 4, Issue 2, 2018, Pages 91-100]
Saghouri, Mohsen Evaluation of Biogas Production from Solid State Anaerobic Digestion of Municipal Sewage Sludge [Volume 4, Issue 2, 2018, Pages 151-161]
Sahraei, Rahmat Determination of the Energy Intensity in Concentrate Feed Production for Livestock (in Niroo-Sahand Factory, Tabriz, Iran) [Volume 4, Issue 2, 2018, Pages 111-119]
Salari Nik, Mehdi Design, Fabrication and Evaluation of Power Transmission to Cutter Bar by Mechanical Gearbox Mechanism [Volume 6, Issue 4, 2022, Pages 21-33]
Samadi, Mosarreza Evaluation of Electronic Nose System Based on Metal Oxide Semiconductor (MOS) Sensors to Detect the Purity of Peppermint Ssential Oil [Volume 6, Issue 2, 2021, Pages 31-37]
Seiiedlou, Sadegh Studding the Precooling Process of Apple in the Commercial and the New Designed Package [Volume 4, Issue 2, 2018, Pages 81-90]
Seiiedlou, Sadegh Evaluation of Sorting Machine of Horticultural Products from the View Point of Machine Performance and Mechanical Damage of Fruit [Volume 5, Issue 1, 2021, Pages 43-53]
Seiiedlou Heris, Syied Sadegh Determination of Optimum Performance Characteristics of Combined Infrared- Convectional Dryer in Drying of Banana Slices [Volume 6, Issue 1, 2021, Pages 11-21]
Sepehr, Behnam Evaluation of Energy Indicators in the Production of Coriander, Rapeseed and Wheat in Nahavand City with Computational Intelligence Techniques [Volume 5, Issue 1, 2021, Pages 11-19]
Sepehr, Behnam Investigation of Some of Traction Parameters with Biodiesel in MF-399 Tractor [Volume 6, Issue 2, 2021, Pages 1-8]
Sepehr, Behnam Design, Fabrication and Evaluation of Power Transmission to Cutter Bar by Mechanical Gearbox Mechanism [Volume 6, Issue 4, 2022, Pages 21-33]
Sepehr, Behnam Intellectualizing and Modeling of Protection Stacking Machine with Different Furrowers [Volume 7, Issue 3, 2023, Pages 35-44]
Seyedloo, Seyed Sadegh Evaluation of Electronic Nose System Based on Metal Oxide Semiconductor (MOS) Sensors to Detect the Purity of Peppermint Ssential Oil [Volume 6, Issue 2, 2021, Pages 31-37]
Seyedlou, Sadegh Study the effect of flatbeard baking mechanism on the quality characteristic of final product [Volume 6, Issue 3, 2021, Pages 1-12]
Shabani, Sohrab Effects of the Planter on Increasing the Yield of Chickpeas Indryland Conditions [Volume 6, Issue 2, 2021, Pages 39-46]
Shadidi, Behdad Investigation of Some of Traction Parameters with Biodiesel in MF-399 Tractor [Volume 6, Issue 2, 2021, Pages 1-8]
Shahgoli, Golamhosien Techno-Economic Analysis of the Mechanized Seed Corn Harvesting: A Case Study of Pars Agriculture and Animal Husbandry Industry (Parsabad Moghan, Iran) [Volume 7, Issue 3, 2023, Pages 45-54]
Sharafat, Mehrnaz Modeling of Energy Consumption and Environmental Indices of Production and Processing of Tea with Regression and Artificial Neural Network Models [Volume 4, Issue 1, 2018, Pages 15-25]
Sharifi, Mohammad Feasibility Study of Using Cow Dung to Generate Electricity for Agricultural Sector in Mashhad County and its Impact on Decreasing Environmental Pollutions in 2035 [Volume 7, Issue 4, 2023, Pages 35-42]
Sharifi, Mohammad Evaluation and design of forward-reverse logistics supply chain network of Shiraz biogas power plant [Volume 8, Issue 3, 2023, Pages 11-25]
Sharifi, Mohammad Evaluation of the environmental sustainability of the integrated biorefinery for the production of chicken meat and biological products [Volume 8, Issue 4, 2024]
Sharifi, Nazanin Investigating the Effect of Superabsorbent on Compaction Behavior of Soil using Confined Compression Test [Volume 7, Issue 4, 2023, Pages 27-33]
Sheikhdavoodi, Mohammad Javad The current situation and evaluating scenarios and solutions to improve sugarcane transportation to the sugar factory [Volume 8, Issue 1, 2023, Pages 52-60]
Sheikh Davoodi, Mohammad Javad Technical Evaluation of the Use of Flat Panel Solar Water Heaters in Greenhouse Heating in the South of Kerman Province [Volume 6, Issue 3, 2021, Pages 49-58]
Sheikhi, Naz-Afarin Investigating the energy consumption indicators and environmental effect of the trout ponds in Ilam province [Volume 8, Issue 1, 2023, Pages 15-22]
Shetab Boushehri, Seyed Mohammad Design, Fabrication and Evaluation of a Hybrid Hydro/Aeroponic System [Volume 8, Issue 2, 2023, Pages 19-30]
Sheykhdavoodi, Mohammad Javad Selection of Appropriate Forward Speed and Tillage Depth Based on the Energy Consumption Factors of Primary Tillage Tools using TOPSIS Method [Volume 7, Issue 2, 2023, Pages 31-38]
Shorkpor, Sirous Evaluation of Conventional Tractors in Terms of Agricultural and Climatic Conditions in Saral Region in Divandarreh County [Volume 6, Issue 2, 2021, Pages 21-29]
Siahpoosh, Mohammad Reza Evaluation of mechanized and traditional harvesting methods of sesame in the north of Khuzestan province [Volume 8, Issue 1, 2023, Pages 33-42]
Siyadat, Masoud Effects of the Planter on Increasing the Yield of Chickpeas Indryland Conditions [Volume 6, Issue 2, 2021, Pages 39-46]
Solemani, Firozeh Design, Construction and Evaluation of Air Assisted Nozzle on Boom Sprayer [Volume 4, Issue 2, 2018, Pages 13-26]
Soleymani, Mohsen Technical Evaluation of the Use of Flat Panel Solar Water Heaters in Greenhouse Heating in the South of Kerman Province [Volume 6, Issue 3, 2021, Pages 49-58]
Solimani, Najmeh Classification of Date Fruit Varieties Based on the Use of Capacitive and Force Transducer Responses [Volume 7, Issue 2, 2023, Pages 1-8]
Soodmand-Moghaddam, Shamsi Evaluation of the environmental sustainability of the integrated biorefinery for the production of chicken meat and biological products [Volume 8, Issue 4, 2024]
Soulu, Arjan Goli Comparison and Evaluation of Double Sided Moldboard Plough with Conventional Moldboard Ploughs [Volume 4, Issue 1, 2018, Pages 1-13]

T

Tabatabaeekoloor, Reza Investigating the Composition of Sugarcane Bagasse and Rice Straw Biomass with Natural Binders on the Mechanical and Thermal Properties of Fuel Pellets [Volume 7, Issue 4, 2023, Pages 1-10]
Tabtabei, Seid Reza The Short-Term Effect of Conservation Tillage on Maize Yield and Soil Properties in Rotation with Wheat in Dasht-e Naz [Volume 4, Issue 1, 2018, Pages 35-44]
Taghinazhad, Jabraeil Assessment of Wheat Harvesting Losses with Different Combines and Provide the Necessary Solutions in Ardabil Province [Volume 5, Issue 1, 2021, Pages 1-10]
Taghinazhad, Jabraeil Energy Consumption Modeling and Sensitivity Analysis of Energy Inputs for Irrigated Wheat Production; Case Study: Ardabil Province [Volume 6, Issue 4, 2022, Pages 11-19]
Taghinezhad, Ebrahim Prediction of Chlorophyll Content of Tomato Plant by Artificial Neural Networks and Adaptive Nero-Fuzzy Inference System [Volume 6, Issue 3, 2021, Pages 59-65]
Taghizadeh-Alisaraei, Ahmad پیرولیز بستر ثابت گیاه ایفوربیا تیروکالی برای تولید نفت زیستی [Volume 6, Issue 2, 2021, Pages 57-65]
Taghizadeh-Tameh, Jalil Design and Performance Simulation of Magnetic Induction Tomography System for Image Reconstruction of Solid-liquid Two-phase Flow [Volume 6, Issue 3, 2021, Pages 23-31]
Taghizadeh-Tameh, Jalil Mass Flow Rate Measurement Based on Electrical Capacitance Tomography with Feasibility Application in Cereal Combines and Assessment of Discretization on Field Potential [Volume 8, Issue 1, 2023, Pages 23-31]
Tahani, Behshad Investigation of Some Effective Parameters on Distribution Uniformity of Manure Spreader [Volume 4, Issue 2, 2018, Pages 71-80]
Taherihajivand, Adel A review of algorithms for solving the project scheduling problem with resource-constrained considering agricultural problems [Volume 8, Issue 1, 2023, Pages 1-14]
Taheri hajivand, Adel Design, construction and evaluation of a vibration absorber for grain loss monitoring system of combine harvesters [Volume 6, Issue 2, 2021, Pages 67-74]
Taherzadeh-Shalmaei, Nahid Analysis of the Factors Affecting Field Waste from Sugarcane Harvesting [Volume 7, Issue 4, 2023, Pages 11-15]
Taki, Orang Development and Evaluation of a Creep Speed System for MF 285 Tractors [Volume 4, Issue 1, 2018, Pages 27-34]
Tarabi, Nazilla Design and Performance Simulation of Magnetic Induction Tomography System for Image Reconstruction of Solid-liquid Two-phase Flow [Volume 6, Issue 3, 2021, Pages 23-31]
Tarabi, Nazilla Mass Flow Rate Measurement Based on Electrical Capacitance Tomography with Feasibility Application in Cereal Combines and Assessment of Discretization on Field Potential [Volume 8, Issue 1, 2023, Pages 23-31]
Tavakoli, Najme Evaluation and design of forward-reverse logistics supply chain network of Shiraz biogas power plant [Volume 8, Issue 3, 2023, Pages 11-25]

V

Vahedi, Adel Energy Consumption Modeling and Sensitivity Analysis of Energy Inputs for Irrigated Wheat Production; Case Study: Ardabil Province [Volume 6, Issue 4, 2022, Pages 11-19]
Vahedi, Jabraeil Estimation of Energy Efficiency and its Effective Factors in Rainfed Wheat Production in Ahar County: Application of the Stochastic Frontier Approach [Volume 8, Issue 2, 2023, Pages 33-43]
Vahedi,, Jabraeil Analysis of the Effect of Iran's Ranking Change in the Legatum Prosperity Index on Export of Iranian Agricultural Machines and Equipment [Volume 7, Issue 1, 2022, Pages 1-12]
Vali Dotappehsofla, Javad Regression Modeling of Combine Harvester Rear Loss as a Function of Travel Speed, Cylinder Rotation Speed and Fan Rotation Speed (Claas, Model Tucano 320) [Volume 5, Issue 1, 2021, Pages 111-118]

Z

Zabelestani, Masoud Determination of Physical and Mechanical Properties of Onion (CV. Horand) [Volume 4, Issue 1, 2018, Pages 79-86]
Zadkhoresh, Shahab Feasibility Study of Using a System Based on Image Processing for Guidance of Tractors During Plowing Operations [Volume 6, Issue 1, 2021, Pages 1-9]
Zaki Dizaji, Hassan The phenomenon of drought and the role of agricultural mechanization in its occurrence or prevention [Volume 7, Issue 3, 2023, Pages 15-26]
Zaki Dizaji, Hassan The current situation and evaluating scenarios and solutions to improve sugarcane transportation to the sugar factory [Volume 8, Issue 1, 2023, Pages 52-60]
Zareei, Samira Optimization of Biogas Production from Co-digestion of Livestock Manure and Pumpkin Waste using the Response Surface Methodology (RSM) [Volume 5, Issue 1, 2021, Pages 101-93]
Zareei, Samira Modeling and Optimizing Harvested Product Quality and Energy Consumption of Cylindrical Mower in Alfalfa Harvesting [Volume 6, Issue 1, 2021, Pages 39-47]
Zareei, Samira Choosing the proper interpolation method for grain loss mapping in combine harvester [Volume 8, Issue 2, 2023, Pages 55-64]
Zarifneshat, Saeed Feasibility Study of Using Cow Dung to Generate Electricity for Agricultural Sector in Mashhad County and its Impact on Decreasing Environmental Pollutions in 2035 [Volume 7, Issue 4, 2023, Pages 35-42]
Zenouzi, Ali Design, Fabrication and Evaluation of a Hybrid Hydro/Aeroponic System [Volume 8, Issue 2, 2023, Pages 19-30]
Zinati Momtaz, Ebrahim Effect of Soil Compaction on Seed Germination of Some Seedlings to Determine Some Design Parameters of Planting Machines [Volume 5, Issue 1, 2021, Pages 103-110]